Table of Contents
Advertisement
Warning labels indicating exposure to laser light and the device classification
are applied onto the body of the scanner (Figure A/B,
For installation, use and maintenance it is not necessary to open the
scanner.
The laser diode used in this device is classified as a class 3B laser product
according to IEC 825-1 regulations and as a Class IIIb laser product
according to CDRH regulations. As it is not possible to apply a classification
label on the laser diode used in this device, the following label is reproduced
here:
Any violation of the optic parts in particular can cause radiation up to the
maximum level of the laser diode (30 mW at 630 to 680 nm).
DATALOGIC S.p.A. Via Candini, 2
40012 LIPPO DI CALDERARA (BO) ITALY
Model No.
Volt
Manufactured
This product conforms to the applicable requirements of
21CFR1040 at the date of manufacture.
Warning and device class labels
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
EMITTED WAVE LENGTH 630~680 nm
Laser diode class label
8
Serial No.
Amp.
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT RADIATION 1 mW
EMITTED WAVE LENGTH 630~680 nm
TO IEC 825-1 (1993)
LASER LIGHT
MAX. OUTPUT RADIATION 7 mW
TO IEC 825-1 (1993)
and
).
7
ix
Advertisement
Table of Contents
