Changing The Default Settings - Datamax E-3202 Operator's Manual

5. If the communication settings are correct press No. If they are not
correct press Yes and modify them by pressing Yes to accept the
setting and No to change it.
6. When the desired communication settings are chosen press Yes to
enter the emulation menu.
7. You are now in the emulation menu. Press Yes to print the current
setting.
8. Press No to change to ESC/POS. (If ESC/POS is already printed
press Yes). Press Yes to enter the next section.
9. If no more changes are required press No until the end, and then
press Yes to save your changes.
10. Your printer is now configured to work with your PC. You can use
your favorite text editor to create your printouts.

4.6 Changing the Default Settings

Your printer is shipped with the following standard configuration:
Communication Parameters
Speed:
Data:
Parity:
Control:
Line spacing:
E-3202/Cash Drawer Printer
9600 baud
8 bits
None
Hardware
Page
6 lpi Media:
Emulation
ESC/POS Code page:
Width:
Country:
Media
Paper Auto LF:
Auto CR:
Contrast (20%):
Contrast (5%):
Character Sets
850
12x24
USA
Other
Off
Off
+00%
+00%
21