4.1.4 Other Modes
There are only three possible error conditions, they are as follows:
Error
Paper Out
The printer is out of media stock or
the stock has been loaded incorrectly.
Head Up
The printer 'Lid' is not down and
latched.
Printhead
The printhead has exceeded normal
Overheated
operating temperature.
Once the error condition has been satisfied the printer will automatically
exit the ERROR mode and return to the OFFLINE mode. To return to
the ONLINE mode and continue printing, press the Left Button once.
This mode will allow the user to verify the data received by the printer.
While in dump mode, the printer will print the received data in
hexadecimal.
To enter DUMP mode:
With the printer off, (both LED's off), press and hold the Left Button
until the word "DUMP" is printed.
To exit DUMP mode:
Turn the printer off, (press and hold Left Button) or disconnect power.
12
Cause
Action
Replace or correctly load
Stock.
Be sure the 'Lid' is
down and latched.
Allow 5-10 minutes for
the printhead to cool.
E-3202/Cash Drawer Printer