Adobe 65030365 - FrameMaker - PC Manual page 499

ADOBE FRAMEMAKER SCRIPTING GUIDE
Function Summary
Error
Constants.FE_OutOfRange (-7)
Constants.FE_ReadOnly (-6)
Constants.FE_WrongProduct (-60)
Returns
Void
Syntax
SetTextVal(textRange, propNum, setVal)
Parameters
Parameter name
textRange
propNum
setVal
SilentPrintDoc
Description
Prints a document or a book using the default print settings. Default print settings are the settings that appear in the
Print dialog box when the user attempts to print a document.
The method initializes the print page size and printer name if they do not have values.
SilentPrintDoc()
To change a document's default print settings, set the document's print properties. [To be linked to the print
properties]
For example, to change the turn registration marks on when you print a document, use the
the document's
RegistrationMarks
If you save the document or attempt to print it again within the same session, any changes you make to a document's
print settings (except
PrintStartPage
box for the document.
The method returns
FE_Success
Error
Constants.FE_SystemError (-42)
Constants.FE_BadParameter (-43)
Returns
int
Syntax
SilentPrintDoc()
Reason
Specified property value is out of the legal range for the specified property.
Property is read-only and cannot be set.
Current FrameMaker version does not support this operation.
Data Type Optional
TextRange No
No
int
TypedVal No
property.
and ) appears the next time the user displays the Print dialog
PrintEndPage
on success. On failure, the method returns one of the following values to
Reason
Could not open or close the printer file.
Parameter has an invalid value.
Last updated 9/26/2011
Description
The text range to which the property is to be applied.
The number of the property to set.
The value of the property to set.
SetInt()
491
method to set
:
FA_errno