Adobe 65030365 - FrameMaker - PC Manual page 374

ADOBE FRAMEMAKER SCRIPTING GUIDE
Object Reference
Property name
ArrowScaleFactor
ArrowScaleHead
ArrowTipAngle
ArrowType
BorderWidth
Color
Dash
Fill
FrameParent
GraphicCantBeSelected
GraphicIsSelected
GroupParent
HeadArrow
Height
Data Type Description
int Indicates the factor by which the arrowhead is scaled as
line width changes (always rounded down to nearest
1/16 point). It is not used if the ArrowScaleHead property
is False
Set to
int
changes. Set to
int Denotes the arrowhead tip angle in degrees.
Denotes the style of the arrowhead. Possible values are:
int
•
Constants.FV_ARROW_STICK (0x1)
•
Constants.FV_ARROW_HOLLOW (0x2)
•
Constants.FV_ARROW_FILLED (0x3)
Indicates the border width specified in points. The
int
permissible range is 0.015 pt to 360 points.
Color Denotes the spot color.
Specifies a dash pattern that is repeated for the length of
Metrics
an object's border. The pattern is stored in a MetricsT
structure. The 0th element of the MetricsT.MetricsT_val
array stores the length of the first dash; the 1st element
stores the following space; the 2nd element stores the
next dash; and so on for an even number of elements.
int Denotes the fill pattern (numbers between 0 and 15).
Constants are provided for fill patterns 0, 7 and 15, as
follows:
•
Constants.FV_FILL_BLACK (0)
•
Constants.FV_FILL_WHITE (7)
•
Constants.FV_FILL_CLEAR (15)
FMObject Denotes the frame containing the graphic object.
Set to
int
to
False
int Set to
False
Specifies the group to which the object belongs.
Group
Note: Anchored frames do NOT have this property.
int Set to
otherwise.
int Denotes the height of the object denoted in points. The
permissible range is from 0.125 points to 3600 points.
Last updated 9/26/2011
.
if arrowhead is scaled as the line width
True
, otherwise.
False
if the graphic object cannot be selected. Set
True
, otherwise.
True , if the graphic object is selected. Else, set to
.
True if the line has an arrow head. Set to
366
False ,