Table of Contents
Advertisement
3 Double-click the deployment shortcut icon to install the product.
Distribution by Imaging Software
Imaging software, such as Norton Ghost, is used to create a master image of
a computer where Autodesk products have been installed. The master image
is then replicated to other computers throughout your facility.
Using imaging software can result in the following situations:
Conflicts with product licensing
Incomplete product installations
NOTE If you are experiencing licensing instability in a SATA RAID environment,
using imaging software to distribute Autodesk products can cause product
activation problems. You may receive an "Activation code limit exceeded" message
if you attempt to activate products in a SATA RAID environment.
Use a Master Image to Distribute Network Licensed Products to
Multiple Systems
A master image can be used to distribute network licensed products to multiple
systems in your classroom or lab environment.
1 Following the quickstarts for your network licensed product, create a
network deployment for installing network applications.
2 Using the deployment shortcut that was created for the product, install
the Autodesk product on the system to be imaged.
NOTE A license server must be running, and each system must be connected
to the network in order to run the application.
3 After the Autodesk product has been installed, use imaging software to
create a master image of the system's hard drive.
4 Apply the master image to the other systems.
Distribution by Imaging Software | 75
Advertisement
Table of Contents
