Adobe 38043755 - ColdFusion Enterprise - Mac Administration Manual page 24

CONFIGURING AND ADMINISTERING COLDFUSION 10
Using the ColdFusion Administrator
Option
KeyPassword
Verify Mail Server Connection
Server Port
Backup Mail Servers (Enterprise
Edition only)
Maintain Connection To Mail Server
(Enterprise Edition only)
Connection Timeout (seconds)
Enable SSL Socket Connections To
Mail Server
Enable TLS Connection To Mail
Server
Mail Spool Settings area
The following table describes mail server spool settings:
Option
Spool Interval (Seconds)
Mail Delivery Threads
(Enterprise Edition only)
Spool Mail Messages For Delivery
To
(Memory spooling available for
Enterprise Edition only)
Maximum Number Of Messages
Spooled To Memory
(Enterprise Edition only)
View Undelivered Mail
Mail Logging Settings area
Select preferences for handling mail logs, as described in the following table:
Description
Password with which the private key is stored. If it is not specified, KeystorePassword is used as
KeyPassword.
Verifies that ColdFusion can connect to your specified mail server after you submit this form.
Even if you do not use this option, send a test message to verify that your mail server connection works.
Enter the number of the port on which the mail server is running. Contact your server administrator if
you are unsure of the appropriate port number.
Enter zero or more backup servers for sending SMTP mail messages. You can enter an Internet address,
such as mail.company.com, or the IP address of the mail server, such as 127.0.0.1. Separate multiple
servers with a comma.
If the mail server requires authentication, prepend the mail server with the user name and password, as
follows: username:password@mailserveraddress
To use a port number other than the default (25), specify mailserveraddress:portnumber
Keeps mail server connections open after sending a mail message. Enabling this option can enhance
performance when delivering multiple messages.
Enter the number of seconds that ColdFusion should wait for a response from the mail server before
timing out.
Enables SSL encryption on the connections to the mail server.
Enables Transport Level Security (TLS) on the connection to the mail server.
Description
Enter the interval, in seconds, at which you want the mail server to process spooled mail.
Enter the maximum number of simultaneous threads used to deliver spooled mail.
Routes outgoing mail messages to the mail spooler. If you disable this option, ColdFusion delivers
outgoing mail messages immediately. In ColdFusion Enterprise Edition, you can spool messages to disk
(slower, but messages persist across shutdowns) or to memory (faster, but messages do not persist).
You can override this setting in the
Enter the maximum number of messages that spool to memory before switching to disk spooling.
Click to view undelivered mails.
Last updated 7/9/2012
tag.
cfmail
19