Connecting To The Network Through Lan Interface - Pioneer Elite VSX-70 Operating Instructions Manual

03
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! The settings must be change at ZONE Setup in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup on page 59.
%
Connect a separate receiver to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
Sub zone (HDZONE)
HDMI IN
(page 89).
HDMI
Main zone
OUT 2
(HDZONE)
SELECTABLE
OUT 2
(HDZONE)
SELECTABLE

Connecting to the network through LAN interface

By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
LAN (10/100)
to LAN port
NAS
Computer
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
31
Connecting your equipment
LAN (10/100)
Internet
Modem
LAN
Router
3 2 1 WAN
LAN cable (sold separately)
to LAN port
Network Setup menu on page 86.