Channel Pan, Fader Cut & Solo - Solid State Logic X-PANDA 82BXEM01A User Manual

Channel Pan, Fader Cut & Solo
At the base of the X-Panda Mono channel strip you will find
traditional analogue desk functions.
The channel stereo "PAN" control, which controls the channels
Left/Right positioning on the Stereo Mix bus.
The analogue signal level FADER, for feeding the Stereo Mix Bus
or controlling the CH OP (Direct Channel Output) level.
Above the Fader you will find two switches:
The "SOLO" button, which mutes all other channels and provides
an AFL monitoring signal, and finally the "CUT" button which
immediately mutes the channel's output.
4