Meridian DSP8000 User Manual page 22

SETTING UP THE
DSP8000
LOUDSPEAKERS
To connect two DSP loudspeakers to a Meridian CD
Player or other digital source
508.24 24-Bit CD Player
DIGITAL
COMMS OUTPUT
DSP loudspeaker – Main R
DIGITAL INPUT DIGITAL COMMS
OUTPUT OUTPUT INPUT
2 1
You can create a complete system by connecting a pair of DSP loudspeakers
directly to a digital source. The DSP loudspeakers include volume, balance,
and tone controls allowing you to control the system using the Meridian
System Remote.
• Connect one of the COMMS sockets on the Meridian source, and the
digital output, to one of the DSP loudspeakers using the M5 lead.
• Link the two DSP loudspeakers together using the S5 lead, as shown in
the illustration.
You can connect another digital source to DIGITAL INPUT 2, and then
configure the appropriate source selection key on the remote to select that
input; see Configuring the sources, page 29.
See the chapter Using the DSP8000 Loudspeakers, page 19, for information
about controlling the DSP loudspeakers.
M5 lead
DSP loudspeaker – Main L
DIGITAL INPUT DIGITAL
OUTPUT
2 1
S5 lead
17
COMMS
OUTPUT INPUT