Technical Specifications - Dakota Digital MCL-2002 Manual

WIRING COLOR CODE FOR GAUGE:
2003 and older HD
MCL-2002* Stock harness color
YELLOW PINK or YELLOW/BLUE*
PINK BLACK/YELLOW
BLACK BLACK
WHITE/BLUE
WHITE WHITE/GREEN
GRAY WHITE
PURPLE BROWN/VIOLET
WHITE/RED
RED ORANGE/WHITE
WHITE/BLUE
WHITE/BLACK BLACK
WHITE/PURPLE RED
BLUE
BLACK
PURPLE WHITE
WHITE/GREEN TAN
GRAY
ORANGE VIOLET
GREEN BROWN
BROWN GREEN/YELLOW
*To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status and Warning Indicators sections for details on locating
VSS, Tachometer, and indicator wires for most motorcycle applications

TECHNICAL SPECIFICATIONS

Switched input voltage:
Battery input voltage:
Speed input signal:
Tach input, 12 HI:
Tach input, 5 LO:
High beam, Left turn, or Right turn: > 4.0V active, < 1.6V off
Neutral, Engine, or Low oil:
Function
tachometer signal
"ENGINE" indicator (-)
ground (connect directly to battery negative)
connected to function switch
output speed signal
VSS signal
security system indicator
+12v constant power
+12 volt with key on
connected to function switch
VSS ground
VSS power
temperature sensor signal
temperature sensor ground
high beam indicator(+)
neutral indicator(-)
pressure sender
left turn indicator(+)
right turn indicator(+)
oil warning indicator(-)
6.5 – 22V, 0.15A typical current draw
6.3 – 22V, 0.0001A typical current draw
> 1.4Vp-p sine wave or square wave
low < 3.0V and high > 7.6V
low < 1.0V and high > 4.0V
< 1.6V active, > 4.0V off
MAN# 650280:D