Dakota Digital MCL-2002 Manual page 3

Remove the dash
Unclip and unplug the factory gauge
Insure that the rubber gasket is still in the dash or
remove from factory gauge and place back on
dash
Insert new gauge from front of dash
Use supplied L-brackets along with the 8-32 screws
and lock washers to secure the gauge
Reinstall the dash
Deuce mounting
NOTE: The supplied L-bracket mounting pieces are not used for this application and can be discarded
Since the Deuce gauge mounts from under the dash mounting requires use of the supplied ABS bracket.
Factory Dash
Panel
Factory Bezel
Gasket
Dakota Digital Gauge
MCL-2002 (-R)
8-32 x ½" Screw
Mounting Tabs (cast in
dash)
New ABS Mounting Bracket
(supplied)
#8 Lock Washer
MAN# 650280:D