Table of Contents
Advertisement
ACCESSORIES INCLUDED
Main Unit
USB Cable
1
Player Overview
A.
Menu button
- Briefly press to enter the previous menu.
B.
Hold switch
C.
Power On / Off / Play / Pause button
- Press and hold about one second to turn on the
player.
- To turn off the player, press and hold until the
Barbie image appears.
- During playback, briefly press to play or pause
the playback.
- In the menu mode, briefly press to select an
item or enter the submenu.
PETAL MP3 PLAYER™
D.
Skip/Search button
- Briefly press to skip to the previous item.
Quick Start Guide
- Press and hold to rewind.
- In the menu mode, press and /or hold to move
the cursor vertically.
E.
Skip/Search button
- Briefly press to skip to the next item.
Congratulations on your Petal MP3 Player™
- Press and hold to fast forward.
purchase. For detailed information on this model
- In the menu mode, press and / or hold to move
the cursor horizontally.
please see the owner's manual located on the CD
F.
Volume up button
Rom; located between the folding packaging card.
- Press to increase the volume incrementally.
G.
Volume down button
BAR900
- Press to decrease the volume incrementally.
H.
GEMSTONE "FUN" button
- Press to access the voice recording.
I.
RESET hole
Barbie and associated trademarks and trade dress are owned by, and used under
J.
MIC hole
license from, Mattel, Inc. ©2007 Mattel, Inc. All Rights Reserved.
K.
Earbud jack
L.
USB port
2
Transferring Files
3
Listening To Music
1 If Windows Media Player 10 is not installed:
3 Connecting the earbuds
1.1
3.1
Connect your player to the computer using the supplied USB cable.
Connect the earbud to the earbud jack
1.2
4 Turn on the player
The computer will detect a New Hardware and start to install the driver
4.1
automatically, if needed. Wait for the system to finish the installation.
Press the
button to turn on the player.
1.3
4.2
When it has finished, double click on "My Computer" on the desktop.
In the main menu, use the Skip buttons to choose Music and press the
1.4
A new removable hard disk will be found in the "My Computer" window. Now
to select.
4.3
you can download the files to your player.
Use the Skip buttons to choose the desired music and press the
4.4
Use the player controls to adjust playback and volume level.
2 If Windows Media Player 10 is installed:
4.5
Press the
button to start music playback.
2.1
5 Turn off the player
Connect your player to the computer using the supplied USB cable.
2.2
5.1
Your player will be recognized as a MTP device.
To turn off the player, press and hold the
2.3
Double click on "My Computer" on the desktop.
appears.
2.4
A MTP device will be found in the "My Computer" window.
2.5
Double click on "MTP Player" in the "My Computer" window.
2.6
Two folders, Data and Media, will be found.
2.7
The music files can be downloaded to any folder. For the photos, please
4
View Photo
download them to the folder named Photo within the Data folder. Otherwise,
you cannot view the photos with your player.
Note:
O
The DRM protected files should be transferred through the Windows Media Player or
6 View Photo
the music management software provided by the online music store where you
6.1
Select Photo in the Main Menu and press the
purchased the files.
6.2
Select Manual, Slide show or Thumbnail and press the
O
Two or three megabytes must be reserved for system files.
Photos.
5
Voice Recording
6
Menu Settings
7 Start Voice Recording
9 Setting Menu
7.1
Select Start Record and press the
button to begin recording.
To navigate the Settings menu:
7.2
Press the GEMSTONE "FUN" button to stop the recording.
9.1
Select Settings in main menu, press the
9.2
Use the
buttons to choose a setting.
Note:
9.3
Press the
button to enter the submenu of the option you selected.
9.4
O
Press the
button to go back to the previous menu.
You can also record without entering the record menu .Press and hold the
GEMSTONE "FUN" button and the recording will begin.
O
The voice recording will be saved as a file named Vxxx.WAV( For example
V001.WAV) in the Voice folder.
The screen will display a message indicating memory is full when there is no memory left.
8
Owner's Manual
8 Playback a Voice Recording file
8.1
Select Voice in the Main Menu and press the
button to enter record
list.(You can also press the GEMSTONE "FUN" button to enter the record list
directly)
See the Owner's Manual on the bundled CD for more details.
8.2
Use the
buttons to select a record for listening.
8.3
Press the
button and a pop-up menu appears.
8.4
In the pop-up menu, select Play and press the
button to play the selected
music.
8.5
Select Delete and a pop-up window will appear. Select Yes or No and press the
button to confirm.
Quick Start Guide
.
button
button to play.
button until the Barbie image
button to enter Photo show.
button to view the
button to enter the settings menu.
P
5
Lanyard and Earbuds
Installation CD
Advertisement
Table of Contents
