Lightolier Lytespan 9178 Specification

MiniForms
Mesh
MR16
Page 1 of 2
5 4
3
3
3 /
4
Ordering Information
Ordering Information
Catalog No. Finishes
Catalog No.
9178WH Matte White
9178BK Matte Black
9178AL Metallic Aluminum
Ordering Information
Features
Catalog No.
1. Lamp Bracket: stamped steel with insulated end knob made of
Features
high temperature silicone rubber which allows for aiming adjust-
9178 WH
ments while fixture is on.
1. Lamp Bracket: Stamped steel with insulated end knob made of high tem-
9178 BK
2. Socket: Bi-pin base ceramic socket wired with No. 18 stranded
perature silicone rubber which allows for aiming adjustments while fixture
9178 AL
Teflon leads with fiberglass outer sleeve.
is on.
3. Transformer: electronic low voltage transformer with integral
2. Socket: Bi-pin base ceramic socket wired with No. 18 stranded Teflon leads
radio frequency interference filter and anti-crossover circuit for
Features
increased reliability; housed in extruded aluminum.
with fiberglass outer sleeve.
1. Lamp Bracket: stamped steel with insulated end knob made of
4. Track Attachment Fitting: molded polycarbonate, rotates into
3. Transformer: Electronic low voltage transformer with integral radio fre-
track and locks on with push tab; integral polarity key guard.
high temperature silicone rubber which allows for aiming adjust-
quency interference filter and anti-crossover circuit for increased reliability;
ments while fixture is on. 5. Push Tab: locks and detaches unit from track.
housed in extruded aluminum.
6. Brass Contact: extends up for connection to second circuit when
2. Socket: Bi-pin base ceramic socket wired with No. 18 stranded
4. Track Attachment Fitting: Molded polycarbonate, rotates into track and
used in Advent
Teflon leads with fiberglass outer sleeve.
locks on with push tab; integral polarity key guard.
7. Tension Pivot Mounts: steel. Allows for 180° horizontal rotation
3. Transformer: electronic low voltage transformer with integral
5. Push Tab: Locks and detaches unit from track. and 180° vertical rotation.
radio frequency interference filter and anti-crossover circuit for
6. Brass Contact: Extends up for connection to second circuit when used with 8. Lamp Guard: tempered glass; can be substituted with 2" filter.
increased reliability; housed in extruded aluminum.
9. Spring: steel springs hold lamp in place.
Advent Lytespan track.
®
4. Track Attachment Fitting: molded polycarbonate, rotates into
10. Housing: steel wire mesh.
7. Tension Pivot Mounts: Steel. Allows for 180° horizontal rotation and 180°
track and locks on with push tab; integral polarity key guard.
vertical rotation.
5. Push Tab: locks and detaches unit from track.
8. Lamp Guard: Tempered glass; can be substituted with 2" filter.
6. Brass Contact: extends up for connection to second circuit when 9. Spring: Steel springs hold lamp in place.
WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS
used in Advent Lytespan track.
10. Housing: Steel wire mesh.
®
AND FINISH, IN ANY WAY THAT WILL NOT ALTER INSTALLED
APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.
7. Tension Pivot Mounts: steel. Allows for 180° horizontal rotation
and 180° vertical rotation.
8. Lamp Guard: tempered glass; can be substituted with 2" filter.
9. Spring: steel springs hold lamp in place.
10. Housing: steel wire mesh.
WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS
AND FINISH, IN ANY WAY THAT WILL NOT ALTER INSTALLED
APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.
™
MiniForms
™
Mesh
MR16
3
5 4 3
1
5 /
2
5 1 /
2
3 /
4
7
7
Track Mountings
Finishes
9178 WH Matte White
All Lytespan
9178 BK Matte Black
Track Systems
9178 AL Matte Aluminum
Finishes
Matte White
Matte Black
Matte Aluminum
Lytespan track.
®
Lytespan
®
Lytespan
Track Lighting
Lytespan
®
Track Lighting
1
1
2
10
1
2 /
4
9
2
10
1
2 /
8 4
9
8
Track Mountings
All Lytespan
Track Systems
Options & Accessories
Track Mountings
2" UV Filter
Electrical/Dimming
All Lytespan
Dimming controls: Use only dimmers specifically designed for use with
Track Systems
electronic transformers, like Lightolier Sunrise Electrical/Dimming
series. Low voltage fixtures may produce audible sound when used with dim-
Dimming controls: Use only dimmers specifically designed for use
mers, which may be objectionable in acoustically critical areas. with electronic transformers, like Lightolier Sunrise
Options & Accessories
Momentum QE series. Low voltage fixtures may produce audible
™
Labels sound when used with dimmers, which may be objectionable in
2" UV Filter
acoustically critical areas.
UL
Electrical/Dimming
Labels
Dimming controls: Use only dimmers specifically designed for use
UL; Patent Pending
with electronic transformers, like Lightolier Sunrise
Momentum QE series. Low voltage fixtures may produce audible
™
Advent is a registered trademarl of Lightolier.
®
sound when used with dimmers, which may be objectionable in
acoustically critical areas.
Job Information
Job Name:
LIGHTOLIER a GENLYTE company.
Cat. No.:
631 Airport Road, Fall River, MA 02720
Labels
(508) 679-8131 • FAX (508) 647-4710
UL; Patent Pending
Lamp(s):
Notes:
Lightolier
a Genlyte company
LIGHTOLIER a GENLYTE company.
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
631 Airport Road, Fall River, MA 02720
We reserve the right to change details of design, materials and finish.
(508) 679-8131 • FAX (508) 647-4710
© 2006 Genlyte Group LLC • A0706
9178
Track Lighting
®
9178
MiniForm
0296
6
6
3
2 /
4
3
2 /
4
Lamps
Lamps
MR16
MR16
50W Max.
50W Max.
Lamps
MR16
50W Max.
and Neptune Momentum QE
TM
and Neptune
™
and Neptune
™
Type:
© Copyright 1995
www.lightolier.com
© Copyright 1995
9178
TYPE:
TYPE:
0296
Mesh MR16
TM
TM