Table of Contents
Advertisement
Parameter
Meaning
Ring delay (seconds)
Number of seconds until the phone will play the ringing tone for an
incoming call.
Allow in overview
If checked, the line will be shown in the overview table
Address
Administrated address (fixed)
Primary line
Line status (fixed)
Ring on/off
If checked a ringer tone is played for incoming calls. (fixed)
Selection Order
Used for outgoing calls if idle lines are selected automatically
Hot/warm line
Not used in this context. (fixed)
Hot/warm
Not used in this context. (fixed)
destination
Overview Configuration Menu
The menu can be reached using the Web Based Management (WBM) or the local user menu at the
phone. The location is:
User -> Configuration -> Keyset -> Overview
Parameter
Meaning
Use FPK order
The phone will order the line entries in the overview table according to the order
of the configured FPKs
Add all lines
All lines are added to the overview table
Ordering
The icons can be used to order the line entries suitable to the users needs
icons
Multi Address Appearance on OpenStage
User Line Key Configuration
The keyset line configuration can be
done for every line. Each line has an
own tab with the same parameters.
The overview screen can be
configured by the user.
00.00.2007 I 15
Advertisement
Table of Contents
