Deep Alarm - Teleflex TFXIDD Operation Manual

USING THE DIGITAL DEPTH GAUGE
CONTROL FUNCTIONS

Deep Alarm

Figure 5
Figure 6
"DEEP" icon
6
The DEEP ALARM can be set for depths up to 99
feet and sounds an alarm when the depth is
greater than the setting.
Press SET until the DEEP ALARM function
becomes active. This is indicated by the blinking
"DEEP" icon. The UP ARROW will activate the
DEEP ALARM and also increase the selected
value. The DOWN ARROW will reduce the value.
Continue to press and hold the UP ARROW until
you reach your desired value.
Note: The minimum DEEP ALARM setting
can not meet or go below the current
SHALLOW ALARM setting.
After your selection is made, the unit will return
to normal operation after 5 seconds. The
"DEEP" icon should now be visible (Figure 6).
If the depth of the water is greater than the
selected value, the alarm will sound and the
icon will blink to indicate the alarm. Pressing
any button will mute the alarm; pressing SET
will mute the alarm and activate the DEEP
ALARM function for additional adjustment. To
permanently turn the alarm off, use the DOWN
ARROW to return the display to "OFF".