Shallow Alarm - Teleflex TFXIDD Operation Manual

USING THE DIGITAL DEPTH GAUGE
The SHALLOW ALARM function can be set for
depths ranging from 1 to 20 feet and sounds an
alarm when the depth is less than the setting.
From normal operation, pressing SET once will
display the SHALLOW ALARM setting and blink
the "SHALLOW" icon. The UP ARROW will
activate the SHALLOW ALARM and also
increase the selected value. The DOWN ARROW
will reduce the value. Hold the UP ARROW
until you reach the desired depth setting.
Note: The maximum SHALLOW ALARM
setting can not meet or exceed the current
DEEP ALARM setting.
After your selection is made, the unit will return
to normal operation after 5 seconds. The
"SHALLOW" icon should now be visible
(Figure 4).
If the depth of the water is less than the selected
value, the alarm will sound and the "SHALLOW"
icon will blink to indicate the alarm. Pressing any
button will mute the alarm; pressing SET will
mute the alarm and activate the SHALLOW
ALARM function for additional adjustment. To
permanently turn the alarm off, use the DOWN
ARROW to return the display to "OFF".
CONTROL FUNCTIONS

Shallow Alarm

"SHALLOW" icon
Figure 2
Figure 3
Figure 4
5