Asus WL 320gE - Wireless Access Point User Manual page 48

Chapter  -Troubleshooting
The ASUS 802.11g AP is not
accessible.
If the ASUS 802.11g AP is not
accessible, restore it to its factory
default settings. Use a pen or paper
clip to press the Reset button at the
rear panel for over five seconds. The
power LED lights up when the AP is
successfully restored to its factory
default settings.
The following settings are the factory default settings of the ASUS 802.11g AP.
Name
Wireless - Interface
SSID
Channel
Encryption (WEP)
Broadcast SSID
Wireless - Bridge
AP Mode
Wireless - Access Control
MAC Access Mode
IP Config - LAN
IP Address
Get IP Address Automatically
Subnet Mask
Gateway
System Setup - Password
Operation Mode
User Name
Password
8
Default Value
default
6
None
No
Access Point Only
Disabled
192.168.1.1
Yes
255.255.255.0
(blank)
Access Point
admin
admin
ASUS 802.11g Access Point