Rear Panel Connections - Pioneer DVR-220-S Service Manual

1
8.2 REAR PART

Rear panel connections

A
1 2
OUT IN
VHF / UHF
Y P
B
COMPONENT VIDEO OUT
B
1 VHF/UHF IN/OUT
Connect your TV antenna to the VHF/UHF IN jack. The
signal is passed through to the VHF/UHF OUT jack for
connection to your TV.
2 COMPONENT VIDEO OUT
A high-quality video output for connecting to a TV or
monitor with a component video input.
C
3 Audio/video outputs 1 and 2
Two sets of audio/video outputs (stereo analog audio;
S-video and standard (composite) video jack) that you can
use to connect TVs or monitors.
4 Audio/video inputs 1 and 3
Two sets of audio/video inputs (stereo analog audio;
S-video and standard (composite) video jack ) that you can
use to connect to satellite receivers, TVs, VCR or other
source component for recording.
5 CONTROL IN
Use to control this recorder from the remote sensor of
another Pioneer component with a CONTROL OUT
D
terminal and bearing the Pioneer
CONTROL OUT of the other component to the CONTROL
IN of this recorder using a mini-plug cord.
6 OPTICAL DIGITAL OUT
A digital audio output for connecting to an AV receiver,
Dolby Digital/DTS decoder or other equipment with
optical digital input.
7 AC IN
Connect to a power outlet using the supplied power cable
E
F
118
1
2
3
OUTPUT 1
R L R L
P AUDIO VIDEO AUDIO
R S-VIDEO
OUTPUT 2
mark. Connect the
2
3
4 5 6
INPUT 1/
AUTO START
REC
IN OPTICAL
VIDEO
S-VIDEO
CONTROL DIGITAL OUT
INPUT 3
Front panel connections
S-VIDEO VIDEO
On the left side of the front panel a flip-down cover hides
a second audio/video input, consisting of an S-video and
standard (composite) video jack, and stereo analog audio
jacks.
DVR-220-S
3
4
AC IN
VIDEO/R/RW
PULL-OPEN
4
7