After Finishing A Recording - Samsung SCD60 Instruction Booklet

M a i n t e n a n c e

After finishing a recording

At the end of a recording you must remove the power source .
Recording with the Battery Pack and leaving the pack on the camcorder can reduce the life span of the battery.
After completing a recording
1. Slide the EJECT switch in the direction of the arrow.
- Opening the cassette door ejects the tape automatically.
Wait until the tape is completely ejected safely.
2. After removing the tape, close the door first and keep the camcorder
in a dust free environment.
- Dust and other foreign materials can cause image degradation.
3. Set the power switch to 'OFF' mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
- When disconnecting the power supply, remove the DC cable from the camcorder before
unplugging the AC cord.
ENGLISH
1
2
3
4
4
63