Troubleshooting - Samsung SCD60 Instruction Booklet

ENGLISH
Tr o u b l e s h o o t i n g

Troubleshooting

Before contacting a service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Self Diagnosis Display
B l i n k i n g
Display
s l o w the battery pack is almost discharged. Change to a charged one.
the battery pack is fully discharged.
fast
When the remaining time of the
2 M I N s l o w
tape is about 3 minutes.
n o
the tape reached its end.
TAPE END
s l o w there is no tape in camcorder.
TA P E
s l o w the tape is protected to
TA P E
the camcorder has some
C . E M G
s l o w
mechanical fault.
D . E M G
L . E M G
R . E M G
moisture condensation has formed
DEW s l o w
in the camcorder.
Moisture Condensation
If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder,
on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or
the unit may not operate correctly.
To prevent possible damage under these circumstances, the camcorder is furnished with moisture sensor.
If there is moisture inside the camcorder, "DEW" is displayed.
If this happens, none of the functions except cassette ejection will work.
Open the cassette compartment and remove the battery.
Leave the camcorder for at least two hours in a dry warm room.
66
Informs that...
Change to a charged battery.
Prepare a new one.
Change to a new one.
Insert a tape.
If you want to record,
release the protection.
1. Eject the tape.
2. Set to OFF.
3. Detach the battery.
4. Reattach the battery.
* If repeated contact local service.
see below.
A c t i o n