Recording From An External Source - Emerson EWR10D4 Owner's Manual

Recording from an external source

Video
DVD-R
DVD-R
DVD-RW DVD-RW
Before recording from an external source, see the instructions for the connection on page 37.
1. Turn the TV and the DVD recorder on, and be sure to select
the input of the TV to which the DVD recorder is connected.
2. Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
This operation may take a while to be recognized.
3. Select the input of the DVD recorder which the external
equipment is connected. (L2 or L1)
• To use the input jacks on the back of this unit, select "L1" position by
pressing [0], [0], [1] on the remote control or the CH L / K buttons.
• To use the input jacks on the front of this unit, select "L2" position by
pressing [0], [0], [2] on the remote control or the CH L / K buttons.
4. Select a recording speed using REC SPEED button. Refer to
"Recording speed" on page 26.
5. Press REC button on the DVD recorder to start recording.
6. Press Play button on the external source to record from.
7. Press STOP C button on the DVD recorder to stop record-
ing.
This operation may take a while to be completed.
38
Recording
Settings for an external source (cont'd)
VR
DVD-RW DVD-RW
XP SP LP
SEP SLP EP
POWER OPEN/CLOSE
TIMER
1 DISPLAY PROG.
A
.@/: ABC DEF
1 2 3
CH GHI JKL MNO
4 5 6
REC
PQRS TUV WXYZ
MONITOR
7 8 9
4 REC SPEED CLEAR SPACE CM SKIP
0
REC
PAUSE
SKIP
5
F H G
B
PLAY
REV FWD
h g
STOP
C
SETUP TOP MENU
MENU/LIST
K
REPEAT ENTER
{ B
RETURN
ZOOM
L
2
3
7