Recording From An External Source; Setting A Disc To Protect - Emerson EWR10D5 Owner's Manual

Recording from an external source

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
Before recording from an external source, see the instructions for the connection on page 33.
1. Turn on the TV and the unit and be sure to select the input
of the TV to which the unit is connected.
Refer to the table on page 13.
2. Hit [OPEN/CLOSE A] to open the disc tray. Place the disc
to record properly.
3. Hit [OPEN/CLOSE A] to close the disc tray.
This operation may take a while to be recognized.
4. Select the input of the unit which the external equipment is
connected. (L2 or L1)
• To use the input jacks on the back of this unit, select "L1" position by
pressing [0], [0], [1] on the remote control or [CH L / K] .
• To use the input jacks on the front of this unit, select "L2" position by
pressing [0], [0], [2] on the remote control or [CH L / K] .
5. Select a recording speed by hitting [REC SPEED].
Refer to "Recording speed" on page 24.
6. Hit [REC/OTR] on the unit to start
recording.
7. Press "Play" on the external source to record from.
8. Hit [STOP C] on the unit to stop recording.
This operation may take a while to be completed.
VR
DVD-RW DVD-RW
To prevent accidental recording, edit-
ing or erasing of the titles, you can
protect them from the Setting menu.
1
Hit [SETUP] in the stop
mode.
Easy Setting Menu or Advanced
Setting Menu will appear.
2
Using [K / L], select "Disc".
Hit [ENTER].
Disc menu will appear.
3
Using [K / L], select "Disc
Protect OFF ➔ ON". Hit
[ENTER].
34
Recording
Settings for an external source (cont'd)
DVD-R DVD-R

Setting a disc to protect

Confirm window will appear.
Disc Protect OFF
Yes
No
4
Using [K / L], select "Yes".
Hit [ENTER].
A disc will be protected.
Writing to Disc
This operation may take a
while to be completed.
XP SP LP
SEP SLP EP
ON
90%
.@/: ABC DEF
1 2 3
4
CH
GHI JKL MNO
4 5 6
PQRS TUV WXYZ REPEAT
7 8 9
DISPLAY SPACE CLEAR SETUP
0
RETURN
TOP MENU MENU/LIST ENTER
2 3 4 8
OPEN/CLOSE CH REV FWD STOP PLAY
REC SPEED REC/OTR
S-VIDEO VIDEO L
5 6
7 8 9
2
DISPLAY SPACE CLEAR SETUP
0
3
TOP MENU MENU/LIST RETURN ENTER
4
K
{ B
L
Note
• The Disc Protect setting is avail-
able only for a DVD-RW disc
recorded in VR mode.
• You can select only Disc Protect
off when a protected disc is
inserted.
To cancel the disc protect:
• When you insert a disc protect-
ed with this unit,"Disc Protect
ON → OFF" will appear .
Disc Protect ON OFF
Yes
No
To reverse the protection for the
disc, select "Disc Protect ON →
OFF" at step 3, then select "Yes".
POWER
AUDIO R
1