Picture - Hitachi CPX14QE Operating Manual

The Contrast, Brightness and Colour can be individually adjusted and set for each camera in both
full screen and quad modes. Follow the steps below to adjust each camera.
Please Note : Only the Contrast, Brightness and Colour can be individually adjusted to suit each
camera. Sharpness and Hue are universal for all cameras. Also, in quad mode, Brightness and
Contrast have a reduced adjustment range compared to the full screen adjustment. They cannot
reduce to the minimum levels possible as in full screen mode (i.e. dark)
1
Press the MENU button on the front of the monitor to obtain
2
Press the UP/DOWN buttons on the front of the monitor to
3
For picture values, moving the slider left will decrease values, whilst moving the slider right
4
Select the Adjust option by using the UP/DOWN buttons.
Please Note: If you select a quad mode option, a 'Q' will be displayed
after the selected camera e.g. CAMERA 1 (Q).
5
Use the LEFT/RIGHT buttons to select the camera you wish to
6
Select the picture control to be adjusted by using the
7
Once highlighted, adjust the chosen controls by pressing the
8
The changed values will remain until they are next altered. Press the MENU button to
6
Main Menu.
select picture option.
Press the LEFT/RIGHT buttons to confirm.
adjust.
UP/DOWN buttons.
LEFT/RIGHT buttons.
Please Note: Hue is only applicable when an NTSC signal is applied.
return to Main Menu or repeatedly to exit.

PICTURE

will increase values.