Features - Hitachi CM823FET User Manual

FEATURES

This Colour monitor provides the following features.
Sharpest Focus and Highest Contrast
Flat screen Enhanced Dot Pitch (EDP) CRT with anti-glare, dynamic focus circuit, dark
glass and an INVAR shadow mask gives the sharpest focus and highest contrast to
minimize eye fatigue.
Wide-range Multi-Scanning
Automatic scanning and automatic adjustment to conform to a wide range of scanning
frequencies and user requirements.
Digital Picture Control Function
Position, size, pincushion, trapezoid, parallelogram, etc. are adjustable through digital
controls. Geometry settings can be stored for different H/V frequencies.
Microprocessor-based preset functions can store 37 sets of geometry settings, including
the default factory settings.
Digital Colour Control Function
Red, green, and blue colour balance are adjustable through digital control. An adjusted
colour setting can be stored and recalled through the colour select function.
Power Saving System
The Environmental Protection Agency (EPA) has established a voluntary program by
which manufacturers enable computer products to go into low power states while not
being used. This monitor has a low power "sleep" mode, which is compliant with the EPA
®
requirements for the E program, and will assist you in conserving energy.
S
NERGY TAR
Please refer to the section of "POWER SAVING SYSTEM" for details.
EasyMenu
An On Screen Display function that allows easy access to adjust all operations from the
front panel.
Plug & Play
This monitor is VESA DDC1/2B compliant when used with a computer compliant with
VESA DDC (Display Data Channel).
Automatic colour purity correction
The monitor uses an advanced technology to detect magnetic fields (geomagnetism) and
automatically adjusts the image to reduce colour purity distortions common with many
monitors.
NOTE:
If as an advanced user, you decide to use an external degaussing coil (other than the
degaussing function included in the digital controls of the monitor) it is strongly suggested
that the monitor be turned off. If you leave the monitor on while using the external
degaussing coil it may cause the monitor to produce uneven colour.
1 - 2