Controls And Adjustments - Hitachi CM630ET User Manual

I
6. CONTROLS AND ADJUSTMENTS
1. POWER AND POWER SAVING INDICATOR
When the power to the monitor is ON, the indicator is lit. In normal operation, the
indicator is green. While in power saving mode, the indicator will turn to orange.
2. POWER SWITCH
Used to
turn
the power of monitor ON and OFF.
3. STATUS BUTTON
Used to access Easy Menu(on screen display) as in Fig.A/B overleaf .This gives
access to the following features: Current resolution mode,horizontal and vertical
sync.
signals, function symbols(including contrast, brightness, horizontal size and
position, vertical size and position, pincushion, trapezoid, parallelogram(CM630ET
only), pin balance(CM630ET only), rotation, recall, colour temperature, RGB colour,
power management, manual degauss, Easy Menu stall ), and a description of the
feature currently selected.
To clear the EasyMenu, either push the status bution again or wait for 10 seconds.
The EasyMenu will disappear automatically at that time.
4. FUNCTION BUTTON
Selects which function in the EasyMenu to be adjusted.
5. ADJUST BUTTONS
Used to decrease or increase the parameter bar of the selected function in the
EasyMenu.
6. SAVE BUTTON
Used to save all function parameter settings which have been adjusted. The
EasyMenu will display "SAVE after the "SAVE" function is completed.
* A total of 41 (for CM620ET) / 42 (for CM630ET) different modes can be stored in
memory and automatically recalled. 6 (for CM620ET) / 7 (for CM630ET) of them are
factory preset for popular graphic standards (see Factory Preset Display Mode on page
12). The remaining 35 modes are reserved for user setting .