Installation - Hitachi CM630ET User Manual

Before installation, please
check the
contents of the shlpplng carton.
The carton
should contain the following Itf'nls
Colour monitor
Power cord
User manual
Adapter for Apple Mac 11 (option)
[f any of the
above item are missing, contact
your supplier as soon as possible.
4. INSTALLATION
Before connecting, make sure that the line voltage is exactly within voltage range
shown on the label located on the rear cover. If you are uncertain of the type of line
voltage where this monitor will be used, consult your local power company or appliance
dealer.
a. Make sure the monitor and the computer are turned off before operation.
b. Plug the power cord into the AC socket on the rear side of the monitor.
c, Plug the other end of the power cord into a power outlet.
d. Plug the free end of the signal cable into the drive connector of the video adapter port
of the computer. Securely tighten the two cable screws on the cable.
When power and signal cable installations are completed, this monitor is ready for
operation,
AC socket
k-l
Pm I
Video cable with 15
pin mail D-SUB
connector
/
CAUTION :
When the monitor is turned on continuously for a long period, the phosphors of
the CRT face plate may "burn" leaving a permanent image on the screen. In order
to preserve CRT life, be sure to turn off the monitor or decrease the displayed
intensity when not in use .
5