Turning Off The Power - Hitachi CP-X3020 User's Manual And Operating Manual

Turning off the power

1. Press the STANDBY/ON button on the
projector or the remote control.
The message "Power off?" will appear on
the screen for about 5 seconds.
2. Press the STANDBY/ON button again
while the message appears.
The projector lamp will go off, and the
POWER indicator will begin blinking in
orange. Then the POWER indicator will
stop blinking and light in steady orange
when the lamp cooling is complete.
3. Attach the lens cover, after the POWER
indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING ►Do not touch around the lamp cover and the exhaust vents
during use or just after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE • Please power off the projector after any connected devices are
powered off.
• This projector has the
projector turn off automatically. For more information, please see the "Operating
Guide" in the CD.
• When you attach or remove the lens cover, move it vertically up and down
while keeping the knob to the right as illustrated in the gure.
AUTO POWER OFF
STANDBY/ON button
POWER indicator
function that can make the
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH
BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
11