Hitachi CP-X2021WN User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. Innovate CP-X2021WN
  6. User manual

Hitachi CP-X2021WN User Manual

Hide thumbs Also See for CP-X2021WN:
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
CP-X2021WN/CP-X2521WN/
CP-X3021WN
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING ►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.
NOTE • In this manual, unless any comments are accompanied, "the
manuals" means all the documents provided with this product, and "the product"
means this projector and all the accessories came with the projector.
Contents
First of all ............................................ 2
Important safety instruction ..............................2
Regulatory notices .............................. 3
Contents of package........................... 4
Arrangement ....................................... 6
Fastening the adapter cover ............... 8
Connecting power supply ................... 8
Turning on the power .......................... 9
Displaying the picture ....................... 11
3
Turning off the power ........................ 12
Replacing the lamp ........................... 13
Using the CD manual ....................... 16
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-X2021WN

Summary of Contents for Hitachi CP-X2021WN

  • Page 1: Table Of Contents

    Projector CP-X2021WN/CP-X2521WN/ CP-X3021WN User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this product.

  • Page 2: First Of All

    First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage.

  • Page 3: Regulatory Notices

    CP-X2021WN, CP-X2521WN, CP-X3021WN Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has...

  • Page 4: About Waste Electrical And Electronic Equipment

    Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available.

  • Page 5: Preparing For The Remote Control

    Holding the hook part of the battery cover, remove it. Align and insert the two AA batteries HITACHI MAXELL, Part No.LR6 or ) according to their plus and minus terminals as indicated in the remote control.

  • Page 6: Arrangement

    Arrangement Refer to table T-1 or T-2 and figures F-1 and F-2 at the end of this manual to determine the screen size and projection distance (from the projector’s end). The values shown in the table are calculated for a full size screen. Screen size (diagonal) Projection distance (±10%, from the projector's end) Screen height (±10%)

  • Page 7: Connecting With Your Devices

    Connecting with your devices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged.

  • Page 8: Fastening The Adapter Cover

    Fastening the adapter cover Use the supplied adapter cover to prevent the USB wireless adapter from coming off easily. Loosen the screw (marked with triangle) on the bottom right of the USB TYPE A port. Insert the tab of the cover into the hole at the upper left of the USB TYPE A port in the direction of the arrow.

  • Page 9: Turning On The Power

    Turning on the power Make sure that the power cord is fi rmly and correctly connected to the projector and the outlet. STANDBY/ON button Make sure that the POWER indicator is POWER indicator steady orange. Then remove the lens cover. Press the STANDBY/ON button on the projector or the remote control.

  • Page 10: Adjusting The Projector's Elevator

    Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. 12° Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 12 degrees.

  • Page 11: Displaying The Picture

    Displaying the picture Activate your signal source. Turn the VIDEO COMPUTER MY SOURCE/ DOC.CAMERA signal source on, and make it send the ASPECT AUTO SEARCH BLANK FREEZE MAGNIFY PAGE VOLUME VOLUME+ button signal to the projector. DOWN VOLUME- button Press the INPUT button on the projector. MY BUTTON KEYSTONE MUTE...

  • Page 12: Turning Off The Power

    Turning off the power Press the STANDBY/ON button on the STANDBY/ON button projector or the remote control. POWER indicator The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange.

  • Page 13: Replacing The Lamp

    Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
  • Page 14 Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.

  • Page 15: Cleaning And Replacing The Air Filter

    Cleaning and replacing the air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled. To prepare the new filters, make contact with your dealer and tell the following type number.

  • Page 16: Using The Cd Manual

    Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows ®...

  • Page 17: Specifications

    Specifications Item Specification Product name Liquid crystal projector Liquid Crystal 786,432 pixels (1024 horizontal x 768 vertical) Panel Lamp 215 W UHP Speaker Power supply/ AC 100-120 V: 3.3 A, AC 220-240 V: 1.6 A Rated current Power AC 100-120 V: 320 W, AC 220-240 V: 310 W consumption Temperature 5 ~ 35 °C (Operating)

  • Page 18: Troubleshooting - Warranty And After-Service

    If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied. Please check the following web address where you may find the latest information for this projector. Product http://www.hitachi-america.us/digitalmedia information and Manuals : Production http://www.hitachidigitalmedia.com information : http://www.hitachiserviceeu.com/support/guides/...

This manual is also suitable for:

Cp-x2521wnCp-x3021wn

Table of Contents