Hitachi CP-X3020 User's Manual And Operating Manual page 26

Selecting an input signal (continued)
1.
Press COMPUTER button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (
is pressed when VIDEO or S-VIDEO port is selected, the
projector will check COMPUTER IN1 port rst.
1.
Press VIDEO button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
S-VIDEO
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (
pressed when COMPUTER IN1 or COMPUTER IN2 port is
selected, the projector will check S-VIDEO port rst.
1.
Press the MY SOURCE / DOC. CAMERA button on
the remote control. The input signal will be changed
into the signal you set as MY SOURCE (
● This function also can use for document camera. Select the
input port that connected the document camera.
COMPUTER IN2
VIDEO
45). If COMPUTER button
45). If VIDEO button is
47).
Operating
COMPUTER button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH
MAGNIFY FREEZE PAGE
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
1 2
POSITION
VIDEO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH
MAGNIFY FREEZE PAGE
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON
1 2
POSITION
MY SOURCE /
DOC. CAMERA button
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH
MAGNIFY FREEZE PAGE
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON
1 2
POSITION
BLANK
VOLUME
MUTE
MENU
BLANK
VOLUME
MUTE
MENU
BLANK
VOLUME
MUTE
MENU
17