Using The Transition Detector Function - Hitachi CP-WX410 Operating Manual

OPTION menu
OPTION menu (continued)
Item
SECURITY
(continued)
(continued on next page)
50

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started
to supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting
has been changed.
• Keystone adjustment feature has been prohibited as long as the Transition
Detector function is ON.
4.1 Turning On the
4.1-1 Use the ▲/▼ buttons on the SECURITY
menu to select TRANSITION DETECTOR and
press the ► or the ENTER button to display
the TRANSITION DETECTOR on/off menu.
Select TURN ON and the current angle and
mirror setting will be recorded.
• This feature may not function properly if the projector is not in a stable
position when TURN ON is selected.
4.1-2 If this function is set to TURN ON when
the vertical angle of the projector or mirror
setting at which the projector is turned on is
different than the previously recorded, the
Transition Detector alarm will be displayed
and the projector will not display the input
signal.
Set the Transition Detector off in the SECURITY menu to display the input
signal.
If the Transition Detector alarm is displayed for about 5 minutes, the lamp
will turn off. This function will activate only when the projector is started
after turning off the AC power.
Transition Detector
4.2 Setting the
4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select TRANSITION
DETECTOR and press the ► or the ENTER button to display the
TRANSITION DETECTOR on/off menu.
4.2-2 Use the ▲/▼ buttons on the TRANSITION
DETECTOR on/off menu to select TURN
ON. The ENTER PASSWORD box (small)
will be displayed.
4.2-3 Use the ▲/▼/◄/► buttons to enter a
PASSWORD. Move the cursor to the right
side of the ENTER PASSWORD box (small)
and press the ► button to display the
PASSWORD AGAIN box, enter the same
PASSWORD again.
Description
Transition Detector
Function
PASSWORD