Table of Contents
Advertisement
Con guring Source Settings
You can
enable
or disable selected source options.
The TV will not switch to the disabled source options
when "SOURCE" button is pressed.
Sources in the Settings menu and press
•
Select
OK button.
•
Press "
" or " " buttons to select a source.
•
Use "
" or " " button to enable or disable the
selected source. Changes are automatically
stored.
Con guring Other Settings
To view general confi guration preferences, select
Other Settings in the Settings menu and press OK
button.
Operation
•
Press "
" or " " buttons to select an item.
•
Use "
" or " " button to set an option.
OK button to view a sub-menu.
•
Press
Menu Timeout: Changes timeout duration for menu
screens.
Active Antenna (optional): This feature enables or
disables the use of active antennas. When antenna
power option is set as On, +5V will be transmitted to
the antenna output.
IMPORTANT: Antenna power should be Off when
standard antenna is used instead of the active
antenna.
Scan Encrypted: When this setting is on, search
process will locate the encrypted channels as well. If
it is set as Off, encrypted channels will not be located
in automatic search or manual search.
Backlight (optional): This setting controls the
backlight level and it can be set to Maximum,
and Medium.
Power Save Mode: Use " " or " " button to select
Power Save Mode. Press " " or " " button to set
Power Save Mode as On or Off. See the section,
"Environmental Information" in this manual for further
information on Power Save Mode.
Note : Backlight function will be invisible if Power Save
Mode is set to on.
Blue Background: Activates or deactivates blue
background system when the signal is weak or
absent.
Software Upgrade: To ensure that your TV always
has the most update information, you can use this
setting. In order for the proper operation, please
ensure that the TV is set to standby mode.
You can enable or disable automatic upgrade by
setting Automatic Scanning option.
You can manually search for new software by
selecting Scan for upgrade.
Hard of Hearing: If the broadcaster enables any
special signal concerning the audio, you can set this
setting as On to receive such signals.
Audio Description: Audio description refers to
an additional narration track for blind and visually
impaired viewers of visual media, including television
and movies. The description narrator talks through
the presentation, describing what is happening on the
screen during the natural pauses in the audio (and
sometimes during dialogue, if deemed necessary).
You can use this feature, only if the broadcaster
supports that additional narration track.
Auto TV Off: You can set the timeout value of auto off
feature.After the timeout value is reached and the Tv is
not operated for selected time , the TV will go off.
English - 30 -
Minimum
Advertisement
Table of Contents
