Table of Contents
Advertisement
Viewing the Connections - Side Connectors
1.
CI Slot is used for inserting a CI card. A CI card allows you to view
all the channels that you subscribe to. For more information, see
"Conditional Access" section.
2.
Side USB input 1.
3.
Side HDMI Input is for connecting a device that has an HDMI
socket.
4.
Headphone jack is used for connecting an external headphone to
the system. Connect to the HEADPHONE jack to listen to the TV
from headphones (optional).
5.
Side USB input 2.
Note: Hard disk drives are not supported via Side USB input 2.
6.
Side audio-video connection input is used for connecting video
and audio signals of external devices. To make a video connection,
you must use the supplied AV connection cable for enabling
connection. First, plug singular jack of the cable to the TV's Side
AV socket. Afterwards, insert your video cable's (not supplied)
connector into the YELLOW input (located on the plural side) of
the supplied AV connection cable. Colours of the connected jacks
should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV connection cable.
Afterwards, insert your device's audio cable's connectors into the RED and WHITE jack of the supplied
side AV connection cable. Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound
connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.
7.
, switch is used for turning the TV on or off.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
•
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
•
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
English - 11 -
Advertisement
Table of Contents
