Download  Print this page

Remote Control Handset; Inserting Batteries; Switching On/Off; To Switch The Tv On - Hitachi L46VG09U Instructions For Use Manual

46” lcd colour television
Hide thumbs

Advertisement

Remote Control Handset

Inserting Batteries

Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
AAA/R3 or equivalent type batteries
Insert two
inside.Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC 50 Hz.
Switch the "
" button to position "|" so the TV
will switch to standby mode. Then the standby LED
lights up.
To switch on the TV from standby mode either:
" button, P+ / P- or a numeric button on
Press the "
the remote control.
-P/CH or P/CH+ touch button on the TV. The
Press the
TV will then switch on.
Note: If you switch on your TV via PROGRAMME UP/
DOWN buttons on the remote control or on the TV
set, the programme that you were watching last will be
reselected.
By either method the TV will switch on.

To Switch the TV Off

Switch the "
" button to position 2 as illustrated,(
) so the TV will switch off. .
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.

Input Selection

Once you have connected external systems to
your TV, you can switch to different input sources.
Press "SOURCE" button on your remote control
consecutively for directly changing sources.
You can operate your TV using both the remote control
and onset buttons.

Operation with the Buttons on the TV

Volume Setting

Press "
" button to increase volume, so a volume level scale
(slider) will be displayed on the screen.

Programme Selection

P/CH +" button to select the next programme or
Press "
"P/CH -" button to select the previous programme.

Viewing Main Menu

Press the "
the
main menu. In the Main menu select sub-menu
using "AV" button and set the sub-menu using
"
" or "
the menus, refer to the menu system sections.

AV Mode

Press the "
to switch between AV modes.

Operation with the Remote Control

The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
V+" button to increase the volume. Press "V-"
Press "
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
P -" button to select the previous
Press "
programme.
P +" button to select the next programme.
Press "
English - 14 -
" button to decrease volume or "
V+"/"V-" button at the same time to view
" buttons. To learn the usage of
AV" button in the control panel on the TV

Advertisement

loading

  Also See for Hitachi L46VG09U

  Related Manuals for Hitachi L46VG09U