Charging Your Headphones Or Bluetooth Adaptor - Altec Lansing BackBeat 903 User Manual

Charging Your Headphones or Bluetooth Adaptor

2
[BackBeat 906 shown]
4
1
2
1
Plug the AC charger into a power outlet.
2
Connect the charger cable to the
headphones or Bluetooth adaptor.
3
Charge each for at least 1 hour before first
time use, or 3 hours to fully charge.
The LED indicator glows red while charging.
When fully charged, LED will turn blue until
unplugged. Do not use your headphones or
Bluetooth adaptor while they are connected to
the charger.
NOTE Never charge the battery where the
temperature may fall below 0°C (32°F) or rise above
40°C (104°F)—for example, in an unattended motor
vehicle.
CHARgIng TIMe
3 hours ...................
Full charge
1 hour .....................
Minimum charge
before first use