Altec Lansing MZX399 Quick Start Manual

WATERPROOF IN-EAR
EARPHONES
1. Make sure the following items are
included in your package.
MZX399 Waterproof
In-Ear Earphones
4. Powering ON/Powering OFF Your Earphones:
-Press and hold the Power button for approximately 3-5 seconds to power on
your earphones. Your earphones will automatically connect with the last
phone they were paired with if they have previously been paired.
-Once powered on, you can press and hold the Power button again for
approximately three seconds to power o your earphones.
NOTE: In order to save power, your
earphones will automatically power
o if left unpaired and idle for
several minutes.
6. Wearing Your Earphones
For the best sound performance and a secure, comfortable fit, be sure that
the ear buds rest gently in your ear and drape around the back of your neck.
Use the ear caps that works best for you.
2. For a look at the various buttons and parts of your earphones,
view the graphic below.
① Earloop
② Free Bit Ear Tips
USB Cable
③ LED Indicator Light
④ Charging Port
⑤ Volume +/Next Track
⑥ Power/Answer
⑦ Volume –/Previous Track
Ear Caps
⑧ Microphone
5. Pairing Your Earphones With a Bluetooth Phone
-To power on your earphones, press and hold the Power button for
approximately 3-5 seconds. Once powered on, you will hear your
earphones audibly say "Powering ON."
-Immediately after powering on your earphones, the LED Indicator
Light will alternately flash red and blue to indicate that your
earphones are ready to be paired.
-Go to the Bluetooth Manager on your phone.
Search Bluetooth devices and select "Altec Sport" to start
~3 Seconds
connecting. Once paired, the LED Indicator Light will slowly flash
blue every few seconds.
7. Listening to Music
Play/Pause
Press the Power button to get music from your audio source to play or pause.
Next/Previous Song
Press and hold the Volume Up or Volume Down buttons to advance to the
next song or go back to the previous one.
Increase/Decrease Volume
Repeatedly tap the Volume Up or Volume
Down buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when
a call is dialed out or when there is
an incoming call. It will resume when
the call ends.

Quick Start Guide

1 2
5
6
4
8
7
3
3. Charging: When charging, a red LED light will illuminate. The light will turn blue
when your unit is fully charged. Your earphones can take up to two
hours to fully charge.
Indicater
Bluetooth
Devices
~3-5 Seconds
Altec Sport
8. Using Your Earphones During Phone Calls
Last Number Redialing
Quickly tap on the Answer button twice and the last number that you dialed will
be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the Answer button.
Ending a Call
To end a call, quickly press the Answer
button, and the call will be disconnected.
Adjusting Volume
By pressing the Volume Up or Volume
Down buttons you can increase or
decrease the volume of the phone call.
12:12 PM
Bluetooth
ON
Paired
Now discoverable