Stand Alone 6002/3/4 Models; Rack Mount 6002/3/4 Models; Figure 2. Model 6000 Series Of Devices Stand Alone Module; Figure 3. Management Aware Rack Mount Modules - Canoga Perkins 6002 User Manual

1.2

Stand Alone 6002/3/4 Models

The 6002/3/4 stand alone models are passive, non-powered devices. The models have no user
configurable switches and require no management aware connections. Because these models have
no electrical components, they can fit easily into multiple environments. The stand alone Model
6000 Optical Multiplexer shown in Figure 2, represents the 6002/3/4 stand alone (SA) series.

Figure 2. Model 6000 Series of Devices Stand Alone Module

1.3

Rack Mount 6002/3/4 Models

The 6002/3/4 rack mount models can be installed into the EdgeAccess Universal Chassis System
(UCS). When inserted in the UCS and a connection is established, the non-powered module will
become management aware. Refer to applicable Canoga Perkins Users Manuals for information
on optional management devices.
Rack mount (RM) models are hot-swappable and can be installed or removed at any time in an
operating Universal Chassis System. Refer to the UCS Model 1000 Users Manual for installation
instructions. Figure 3 shows two 6002 RM modules installed in a typical chassis configuration.

Figure 3. Management Aware Rack Mount Modules

1-2
®
EdgeAccess Universal Chassis System
6002 6002
6002/6003/6004 WWDM Users Manual