Figure 9. Chassis Management Screen Showing Inserted Modules; Figure 10. Wdm Information Screen For The Wwdm Model 6002 - Canoga Perkins 6002 User Manual

Figure 9. Chassis Management Screen Showing Inserted Modules

To access inserted modules from the UCS DMM Chassis Management screen:
•
Press the SPACE BAR to move the cursor to the desired Slot number (refer to Figure 9).
•
When the selected Slot number 4 is highlighted, press the CR (Carriage Return / Enter key).
•
The WDM Information screen will appear, identifying the data of a polled module. All
information that the DMM gathered for the selected module is shown in Figure 10.
•
Press the SPACE BAR to select another installed component (reference Slot number 5).
•
Press the ESC (Escape key) to return to the previous screens.

Figure 10. WDM Information Screen for the WWDM Model 6002

4-2
®
EdgeAccess Universal Chassis System
6002/6003/6004 WWDM Users Manual
The DMM will show that two Model
6002-LightWave Modules are inserted
into Chassis 1 on the LOCAL UCS.
The Status of Slots 4 & 5 will show OK.
The WDM Information screen will show
WWDM Model 6002 information – no customer
configurable prompts are available.
Press ESC to go to previous screen.