Antenna Connections - Emerson Dora the Explorer DTE316 Owner's Manual

CONNECTING THE ROD ANTENNA (NOT SUPPLIED).
Insert the Rod Antenna on top of the rear cabinet and connect other end to the antenna jack as
shown below.
ROD ANTENNA AND ADAPTOR ARE NOT SUPPLIED.
OUTDOOR ANTENNA CONNECTIONS
OUT DOOR VHF/UHF ANTENNA CONNECTION(ANTENNA NOT SUPPLIED)
Follow the instructions for the type of antenna system you intend to use. If using cable or
Satellite, see page 8.
Combination VHF/UHF
Antenna(Single 75 ohm cable
Or 300 ohm twin-lead wire)
VHF / UHF
75 Ohm
Connect the 75 Ohm cable
form combination VHF/UHF
antenna to the antenna jack.
OR
If your combination antenna
has a 300 ohm twin-lead
wire, use a 300-75 ohm
matching transformer
(NOT SUPPLIED)

ANTENNA CONNECTIONS

Combination VHF/UHF
Antenna(separate VHF and
UHF 300 ohm twin-leads)
Combiner
VHF 300 Ohm
Connect the UHF twin-lead
wire to a combiner (NOT
SUPPLIED). Connect the
VHF twin-lead to a 300-75
ohm matching transformer
(NOT SUPPLIED). Attach
the transformer to the
combiner. Attach the
combiner to the antenna
jack.
10
Separate VHF/UHF
Antennas
UHF 300 Ohm
Combiner
Connect the 75 ohm cable
from the VHF Connect
antenna and the UHF
antenna twin-lead wire to a
combiner(NOT SUPPLIED).
Attach the combiner to the
antenna jack.
NOTE: If your VHF antenna
has a twin-lead wire use a
300-75 ohm matching
transformer, then Connect
the transformer to the
combiner.
UHF 300 Ohm
VHF 75 Ohm