Vcr Connections - Emerson Dora the Explorer DTE316 Owner's Manual

Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable
(CABLES NOT INCLUDED).
INCOMING CATV
CABLE
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of
the VCR.
2. Connect a 75 ohm coaxial cable from the VCR's 75 ohm OUT jack to the ANT jack on the
rear of the TV.
3. Press the AV IN button until regular TV or CATV appears on the TV screen and press
PLAY on the VCR to watch a tape.
Follow the instructions below to connect a VCR to your television using Audio/Video cables
(CABLES NOT INCLUDED).
INCOMING CATV
CABLE
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of
the VCR.
2. Connect the audio cable from the VCR's Audio OUT jack to the TV's Audio IN jack.
Connect the video cable from the VCR's Video OUT jack to the TV's Video IN jack.
3. Press the AV IN button until AV appears on the TV screen and press PLAY on the VCR to
watch a tape.
NOTE:
Above are basic connection instructions; for detailed connection instructions for external
units, refer to the external unit's owner's manual.

VCR CONNECTIONS

VCR
From VCR OUT jack
VCR
From VCR OUT jacks
AUDIO Cord
VIDEO Cord
11
To TV IN jacks