Epson WorkForce AL-M400DN User Manual page 100

AL-M300/AL-M400 Series User's Guide
The printer has insufficient memory to execute the current task. Press the OK button on the control
panel to resume printing, or cancel the print job. To cancel the print job, see "Canceling Printing" on
page 109.
Need Memory
The printer has insufficient memory to complete the current print job.
To clear this warning message, select Clear Warning from the control panel's Reset Menu.
See"How to access the control panel menus" on page 60 for instructions.
To prevent this problem from recurring, add more memory to your printer as described in "Memory
modules" on page 203, or reduce the resolution of the image to be printed.
No trays available Cancel the Job
All of the MP Tray AutoSel, Cassette1 AutoSel, Cassette2 AutoSel, Cassette3 AutoSel,
and Cassette4 AutoSel settings in Tray Menu are set to Off, so the printer cannot feed paper. Press
the W Pause/Release button to cancel the print job. To continue printing, specify the paper source
on the printer driver, or set the above settings in Tray Menu to On.
Option Unit Error yyy
The printer cannot recognize the installed optional product. Remove the optional product and
reinstall it.
Paper Out tttt sssss
There is no paper in the specified paper source (tttt). Load paper of the size (sssss) into the paper
source.
Paper Set tttt pppp
The paper loaded in the specified paper source (tttt) does not match the required paper type (pppp).
Replace the loaded paper with the correct paper type and press the OK button to resume printing, or
cancel the print job. To cancel the print job, see "Canceling Printing" on page 109.
If you press the OK button without replacing the paper, the printer will print on the loaded paper even
though it does not match the required paper type.
Paper Set tttt sssss
Using the Control Panel 100