Canon HV30E Instruction Manual page 86

86 Trouble?
Memory Card Operation
Problem
Memory card cannot be
inserted.
Cannot record on the memory
card.
Memory card cannot be played
back.
Image cannot be erased.
" " flashes in red.
Printing
Problem
The printer is not operating
even though the camcorder
and printer are correctly
connected.
Editing
Problem
Cannot record with this
camcorder video input from an
external video device
connected to the HDV/DV
terminal using a DV cable.
Others
Problem
A rattling can be heard from the
camcorder.
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
Memory card is full. Erase still images to free some space or
replace the memory card.
Memory card was not initialized. Initialize the memory card.
The folder and file numbers have reached their maximum value.
Set [FILE NOS.] to [RESET] and insert a new memory card.
Set the camcorder to
Image is protected. Cancel the protection.
Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Initialize the memory card if flashing
persists.
Disconnect the USB cable and turn off the camcorder and the
printer. After a short while, turn them on again, set the
camcorder to
Set [AV DV] to [OFF].
Wrong signal standard. Refer also to the instruction manual of
the connected device.
Dubbing may work using the AV/
The internal lens fixture can move when the camcorder is turned
off. This is not a malfunction.
Solution
.
Solution
mode and restore the connection.
Solution
terminal.
Solution
18
63
64
38
31
63
64
–
37
–
–