Canon HV30E Instruction Manual page 37

DV REC MODE
[ STD PLAY], [
When [HD STANDARD] is set to one of
the DV standards, you can change the
video quality and as a result, also the
recording time available on the tape.
Recording in LP mode extends the
available recording time on the tape 1.5
times.
Depending on the condition of the tape
(long usage, imperfections, etc.) you may
notice some video problems (blocky video
artifacts, banding, etc.) in the playback
picture when playing back recordings
made in LP mode. We recommend using
the SP mode for important recordings.
If you make recordings in both SP and
LP modes on the same tape, during
playback you may notice some video
problems in the picture at the point where
the recording mode changes.
When playing back in this camcorder
tapes recorded in LP mode with other
devices or vice versa, you may notice
some problems in the playback picture or
the sound may stop briefly.
DV AUDIO
[ 16bit], [
When [HD STANDARD] is set to one of
the DV standards, you can change the
audio quality.
[ 16bit]: To record sound at the
highest quality.
[ 12bit]: If you will dub audio or add a
music track later with an external device.
DV
LONG PLAY]
DV
12bit]
Menu Options Lists
WIND SCREEN
Mode switch:
[ AUTO], [ OFF
The camcorder automatically reduces the
background sound of wind when
recording outdoors.
The wind screen cannot be turned off
when the mode switch is set to
MIC ATT
[ ON], [ OFF]
REVIEW
[ OFF], [ 2sec], [
[ 6sec], [ 8sec], [
Selects the time to display a still image
after it has been recorded.
You can erase (
while you are reviewing it (or immediately
after recording it, if set to [
This menu item will not be available
when the drive mode (
(continuous shooting),
speed continuous shooting) or
exposure bracketing).
If you press
DISP.
still image, it will continue to be displayed
indefinitely. Press
PHOTO
return to the normal display.
AV DV
[ ON], [ OFF]
37
]
.
( 59)
4sec],
10sec]
63) the still image
OFF]).
54) is set to
(high-
(auto
while reviewing a
halfway to
( 72)