Table of Contents
Advertisement
28
Playback
During the playback of HDV recordings: Even
though their icons will appear on screen, the
following special playback modes are not
available.
- Reverse slow playback
- Frame reverse
- Double speed playback (forward or reverse)
To protect the tape and video heads, the
camcorder will enter the stop mode (
playback pause (
seconds. To resume the playback press
Adjusting the Volume: Speaker and
Headphones
The camcorder plays the sound with the
built-in speaker. When you're using the
viewfinder for playback, you can connect
a pair of headphones to listen to the
sound. You can also use the headphones
to check the audio level while recording.
Adjusting the Volume of the Speaker
1
If the joystick guide does not appear
on screen, press (
2
Push the joystick (
-
or
to adjust the volume.
• To turn off the volume completely,
keep pressing (
icon changes to
• You can press (
joystick guide during playback.
) if left in
) mode for 4 minutes 30
/
(
) to display it.
+
) toward
) until the volume
.
) again to hide the
.
Using Headphones
The headphones are connected to the
AV/
terminal, which is used for both the
headphones and the audio/video output.
Before connecting the headphones,
follow the procedure below to change the
function of the terminal from AV output to
(headphones) output and make sure
the
icon appears on the screen.
8)
PLAY/OUT SETUP2
AV/PHONES
1
Press
FUNC.
2
Select (
) the
(
) to open the setup menus.
3
Select (
SETUP2]* and press (
4
Select (
press (
).
5
Select (
(
).
Default value
AV
.
icon and press
) [
PLAY/OUT
).
) [AV/PHONES] and
) [
PHONES] and press
(
8)
Hide quick links:
Advertisement
Table of Contents
