Select - Compaq TP Desktop Connector AA–PVNFG–TE Client Services Reference Manual

SELECT

6.5 SELECT
This command selects records from the log file and writes them to a file from
which you can generate customized reports. If you do not specify a qualifier, all
records are selected.
Format
SELECT file [/qualifier]
Parameters
file
Is a required parameter that specifies the name of the file to which the selected
records are written.
Qualifiers
/APPLICATION=application
Allows you to select detailed records associated with the application(s)
specified. The application specification can be an ACMS application name
or a list of application names. If you specify a list, separate the names with
a comma and enclose the list within parentheses. The asterisk (*) wild card
character is permitted in application name specifications. If you do not specify
/APPLICATION, records for all applications are selected unless you set default
application(s) with the SET command.
Specifying /APPLICATION with the SELECT command overrides any default
applications that you previously set. Specifying /APPLICATION=* on the
SELECT command selects records for all applications, overriding any defaults
that are set.
/BEFORE[=date-time]
Selects detailed records that were written before the date and time specified.
The date-time specification is optional. If you omit it, records written earlier
than the current date are selected. Specify date and time in the OpenVMS
standard format dd-mmm-yyyy:hh-mm-ss.
/INPUT=file
Specifies a source file from which records for the report are to be read. If you
do not specify a source file, the latest version of SYS$ERRORLOG:
ACMSDI$COMPRESSION.LOG is used, unless you have previously specified
6–10 Data Compression Monitor Commands