Adjusting The Wake Up Times - Emerson Research CKS3020 Owner's Manual

Adjusting The Wake Up Times

®
Your SmartSet clock radio has two separate alarms that can be set and used
independently. You may use the alarms to wake two people at different times, or
you may use one alarm for weekdays and the other for weekend wake up times.
The procedure for adjusting the wake up time is the same for both Alarm 1 and
Alarm 2.
1.) Depress and hold either the ALARM 1 or ALARM 2 setting button.
The respective Alarm 1 or Alarm 2 time, and "DAY OF WEEK" indicators will
appear.
2.) While holding the ALARM 1 or ALARM 2 setting button, depress either the
SET (Up) or
your respective Alarm 1 or Alarm 2 desired wake up time.
3.) When the desired wake up time appears on the display, release the SET
(Up) or (Down) buttons.
NOTE: Be sure that you have set the wake up time correctly by observing the
AM indicator for each alarm. If the AM indicator is ' On' the wake up time is
"AM". If the AM indicator is ' Off' , the wake up time is "PM".
4.) When the desired wake up time (AM or PM) appears on the display, release
the ALARM 1 or ALARM 2 setting buttons.
CKS3020_072706.p65
(Down) button to move the alarm display ahead or back to
AM indicators
11
11 27/7/2006, 11:35