Adjusting The Wake Up Times - Emerson Research SmartSet CKS3516 Owner's Manual

Adjusting The Wake Up Times

®
Your SmartSet clock radio has two separate alarms that can be set and used
independently. You may use the alarms to wake two people at different times, or
you may use one alarm for weekdays and the other for weekend wake up times.
The procedure for adjusting the wake up time is the same for both Alarm 1 and
Alarm 2.
1.) Depress and hold either the ALARM 1 or ALARM 2 setting button.
The display will change from the correct
time to the Alarm 1 or Alarm 2 wake up
time.
2.) While holding the ALARM 1 or ALARM 2 setting button, depress either the
SET + or – button to move the display ahead or back to your desired wake up
time.
3.) When the desired wake up time appears on the display, release the SET + or
– buttons.
NOTE: Be sure that you have set the wake up time correctly by observing
the AM indicator. If the AM indicator is ' On' the wake up time is "AM". If the
AM indicator is ' Off' , the wake up time is "PM".
4.) When the desired wake up time (AM or PM) appears on the display, release
the ALARM 1 or ALARM 2 setting buttons.
CKS3516-26_070307.p65
11
11 3/7/2007, 17:09