Lightolier LP Series Specification

LP1SBK
2.75" 1.5"
(6.99 cm) (3.8 cm)
4.5"
(11.4 cm)
LPH1SBK
2.75"
(6.99 cm)
4.5"
(11.4 cm)
.91"
(2.31 cm)
.78"
(1.98 cm)
Low Level Recessed LED Luminaire
Features
Illumination: The LP Series
LED utilizes three high
performance white LEDs
combined with a solid-state
integral driver circuit. A user-
selectable, three level intensity
control or an optional line
voltage dimmable driver (120
VAC models only) are available.
The LP Series with white LEDs
operates at 3,500 K nominal
with a minimum CRI of 80.
The amber LEDs operate at a
nominal wave length of 600 nm.
Housing: Assembled from
premium die cast aluminum
and painted in a durable
powder coat finish. Numerous
standard finishes available with
optional finishes available for
custom projects. Assembled
as a one-piece device that
includes the LED light engine,
integral power supply, three
level intensity control or line
voltage dimmable driver (120
VAC models only). All LED
and electrical components
are protected by both a
polycarbonate lens, and high
impact power supply case
that will be located within the
junction box.
Electrical Specifications:
Current at dip switch setting
12 VDC: low 0.140 A,
medium 0.330 A, high 0.430 A
12 VAC: low 0.220 A,
medium 0.465 A, high 0.585 A
120 VAC: low 0.035 A,
medium 0.065 A, high 0.085 A
120 VAC line voltage dimmable:
60 Hz, 0.072 A
LP Series
Operation: "Normally
On" remote power supplies
(LPS Series) are available
from 100 VA to 500 VA in
12 VAC. Power supplies (120
VAC input) conform to UL
1598 and are rated as Class
2 Distribution systems. All
power supplies are furnished
in a UL type 3R enclosure and
are provided with thermal
type secondary output circuit
protection. "Normally Off/
Emergency" remote power can
be provided by any Lightolier
12V emergency lighting
product with additional remote
capacity (example: C3250 or
C3275 Series). "Normally On/
Emergency" remote power can
be provided by Lightolier LPE
emergency power system. The
LPE system will support up to
20 LP Series 12 V luminaires
operating in both continuous
duty and emergency operation
for 90 minutes.
Warranty
Five-year full electronics
warranty.
Job Information Type:
Job Name:
Cat. No.:
Notes:
Page 1 of 2
Electronics: Designed with all
solid-state components with a
rating of 10 years of continuous
"normally on" use. Electrical
connection is made via two
flying leads. Standard product
incorporates dip switches
on rear of product allowing
three levels of intensity. An
optional line voltage dimmable
driver is available on 120 VAC
models (see factory options).
The line voltage dimmable
driver requires a reverse-phase
ELV dimming system. See LP
Series Compatible Dimmer
specification sheet.
Operating Temperature
Range: Standard wet location
-31°F (-35°C) to 104°F (40°C)
Code Compliance
UL 1598 and 924 listed. UL
listed for wet locations. NFPA
101, NEC, BOCA, OSHA and
IBC illumination standards.
Meets ADA specifications for
wall mounted lighting fixtures.