Start A.p.s. (Auto Programming System) - Hitachi L42VG08U Instructions For Use Manual

start A.P.S. (Auto Programming System)

1
When the TV is operated for the first time, installation wizard will guide you
through the process. First, language selection screen will be displayed.
2
• Use " up " or " down " buttons to select your language and press OK
button to set selected language and continue.
• After selecting the language, "First Time Installation" screen will be
displayed, requiring you to set Country,Teletext Language Scan
Encrypted and Active antenna
3
• By pressing " left " or "
and press " down " button to highlight Teletext Language option. Use
" left " or " right " button to select desired Teletext Language.
• Press " down " button after setting Teletext Language option. Scan
Encrypted will be then highlighted. You can set Scan Encrypted as Yes
if you want to scan coded stations.After selecting the Scan Encrypted,
select Active antenna feature by pressing "
" Left " or " Right " button to set active antenna mode as on or off. If an
active antenna is connected to your TV, you can select this option as
On (5V). Antenna power should be Off when standard antenna is used
instead of the active antenna.
• Press OK button on the remote control to continue and the 'Do you
want to start an automatic channel scan?" message will be displayed
on the scree n.
4
• To select the "Yes" or "No" option, highlight the item by using "
" right " buttons and press button.
• Afterwards, automatic search OSD will be displayed on the screen "
and the television will search for digital terrestrial
broadcasts.
5
Note: You can press MENU button to cancel.
• After all the available stations are stored, Channel List will be displayed
on the screen. If you like the sort channels, according to the LCN,
please select "Yes" and than press "OK".
• Press OK button to quit channel list and watch TV.
important note.
Once the TV has found all your local stations, they are then automatically
assigned a programme number and name, if available from the broadcast.
options.
right " button, select the country you want to set
Up " or "
"
,
Down " button. Use
left " or
and analogue TV