Start A.p.s. (Auto Programming System) - Hitachi 32LD8700C B Instructions For Use Manual

important note before starting Auto Setup
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV
please ensure that they are switched on before automatic tuning begins. In the case of
a VCR, insert a pre-recorded tape and begin playback of your equipment. These
measures ensure that all your external equipment is tuned in during the Auto Setup
procedure.

start A.P.S. (Auto Programming System)

1
When the TV is turned on for the first time, it is in the digital mode.
Because this is the first time the TV is used, there are no channels stored
in the memory and the following message appears on the screen.
2
To start installation process, select
will take about five minutes. To cancel searching, you can press "
any time during the process.
3
After Automatic Search
channel search appears on the screen. To continue APS, first select the language
and country by pressing
4
After APS is finalized, the programme table will appear on the screen.In the
programme list you will see the programme numbers and names assigned to the
programmes.
5
For details on the Program menu please refer to the Installation Menu section of
the instruction book.
important note.
Once the TV has found all your local stations, they are then automatically
assigned a programme number and name, if available from the
broadcast.
"Yes", to cancel select
process is completed, a message asking for analogue
| }
/ button and then press the RED or "
"No". This process
" button at
OK " button
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
No
AUTOMATIC SEARCH
Channels:
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
12 %
Cancel searching
MENU
AUTO PROGRAM
Language English
Country
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
OK
APS is running...
UK - I 055,25 Mhz
GB
GB
UK
Cancel
Cancel